1. general description the 74lv132-q100 is a low-voltage si-gate cmos device that is pin and function compatible with 74hc132-q100 and 74hct132-q100. the 74lv132-q100 contains four 2-input nand gates which accept standard input signals. these gates are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. the gate switches at different points fo r positive and negative-going signals. the difference between the positive voltage v t+ and the negative voltage v t ? is defined as the input hysteresis voltage v h . this product has been qualified to the automotive electronics council (aec) standard q100 (grade 1) and is suitable for use in automotive applications. 2. features and benefits ? automotive product qualif ication in accordance with aec-q100 (grade 1) ? specified from ? 40 ? c to +85 ? c and from ? 40 ? c to +125 ? c ? wide operating voltage: 1.0 v to 5.5 v ? optimized for low voltage applications: 1.0 v to 3.6 v ? accepts ttl input levels between v cc = 2.7 v and v cc = 3.6 v ? typical output ground bounce < 0.8 v at v cc = 3.3 v and t amb = 25 ? c ? typical high-level output voltage (v oh ) undershoot: > 2 v at v cc = 3.3 v and t amb = 25 ? c ? esd protection: ? mil-std-883, method 3015 exceeds 2000 v ? hbm jesd22-a114f exceeds 2000 v ? mm jesd22-a115-a exceeds 200 v (c = 200 pf, r = 0 ? ) ? multiple package options 3. applications ? wave and pulse shapers for highly noisy environments ? astable multivibrators ? monostable multivibrators 74lv132-q100 quad 2-input nand schmitt trigger rev. 1 ? 11 november 2013 product data sheet
74lv132_q100 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 1 ? 11 november 2013 2 of 16 nxp semiconductors 74lv132-q100 quad 2-input nand schmitt trigger 4. ordering information 5. functional diagram table 1. ordering information type number package temperature range name description version 74lv132d-q100 ? 40 ? cto+125 ? c so14 plastic small out line package; 14 leads; body width 3.9 mm sot108-1 74lv132pw-q100 ? 40 ? cto+125 ? c tssop14 plastic thin shrink small outline package; 14 leads; body width 4.4 mm sot402-1 74LV132BQ-Q100 ? 40 ? cto+125 ? c dhvqfn14 plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 14 terminals; body 2.5 ? 3 ? 0.85 mm sot762-1 fig 1. logic symbol fig 2. iec logic symbol fig 3. logic diagram (one gate) mna407 1a 1y 1 3 1b 2 2a 2y 4 6 2b 5 3a 3y 9 8 3b 10 4a 4y 12 11 4b 13 2 3 & 1 5 6 & 4 10 8 & 9 mna408 13 11 & 12 mna409 a y b
74lv132_q100 all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2013. all rights reserved. product data sheet rev. 1 ? 11 november 2013 3 of 16 nxp semiconductors 74lv132-q100 quad 2-input nand schmitt trigger 6. pinning information 6.1 pinning 6.2 pin description (1) the die substrate is attached to the exposed die pad using conductive die attach material. it cannot be used as a supply pin or input. fig 4. pin configuration so14 and tssop14 fig 5. pin configuration dhvqfn14 / 9 4 $ 9 & |